FLOORING
COMPOUNDS AND DRESSINGS
|
| KORODUR FLOORING SYSTEM |
Hard aggregate dry shake / topping system for
industrial floors. |
| TUFSCREED |
Three component solvent free epoxy repair system
for the screeding and repair of floors where high strength, abrasion
and chemical resistance is required. |
| TUFTACK |
High strength epoxy bonding agent used prior to
the laying of screeds, tiles, paving etc. |
| SUREFLOOR |
A self levelling screed of advanced design which
requires minimum trowelling to achieve a smooth surface. Use PVA diluted
1:1 with water as a primer. Sets in about 90 minutes. Do not use on
suspended floors. Not a traffic surface.
Rate of use guide:
25kg yields 7 square metres at 3mm depth. |
| LEVELETEX LIQUID |
Replace water with Leveltex Liquid when using
Surefloor. Improves strength and abrasion resistance. A must if movement
is anticipated in the finished floor. |
| CONCRETE CURING AGENT
WB |
Water based liquid emulsion for use as an aid
to hydration of newly placed concrete. Available in white or clear.
Conforms to DOE Roads and Bridges specification. ASTM 309 & MPWB
General Specification 201
Rate of use guide:
5-6 square metres per litre |
| CONDENSE |
Chemical reactive densifier for use on concrete
and Terrazzo where a dustproof, hard and chemically resistant finish
is required.
Rate fo use guide:
5-6 square metres per kilo (3 coats) |
| SURECO LIQUID DUSTPROOFER
& HARDENER |
A sodium silicate based product which chemically
reacts with the free lime in concrete to give a hard insoluble surface.
Rate of use guide:
4 - 6 square metres per litre per coat depending upon porosity.
Two coats normally required. |
| TUFCOTE WB |
All purpose water based epoxy coating system.
Seals and protects concrete to provide a durable, hygienic and easily
maintained surface. Available in clear or a range of colours. |
| TUFCOTE AC15 |
A Clear acrylic surface sealer and dustproofer.
For concrete floor screeds and paving. |
| TUFCOTE SF |
Solvent free. High build chemical resistant floor
coating. |
| TUFCOTE SL |
Self levelling epoxy flooring system 3 component,
abrasion and chemically resistant. |
| WATERPROOF MORTAR (fast
set) |
High strength mortar for the bedding of quarry
tiles, ceramic tiles and paving. Standard or Fast Set grades. Available
in White & Grey |
|
|
SURFACE
TREATMENT and DAMP PROOFING
|
| CLEANERS |
|
| BRICKCLEAN MSR |
Acid based liquid for cleaning brickwork, concrete
etc. Removes mortar stains and efflorescence. |
| BRICKCLEAN SUPER |
Acid based strong action cleaning gel for the
removal of stubborn mortar stains and efflorescence. |
| ERADAROT WALLWASH |
Water based fungicidal, biocidal fluid for the
treatment of fungus, algae and bacteria on masonry and brickwork and
roofs |
| DEGREASING SOLUTION |
General Purpose degreaser |
| WATERPROOFING |
|
| WATERSEAL |
Cementitious waterproofing system for the effective and permanent
treatment of dampness and water penetration. WRC approved for use
in contact with potable water.
Available in White and Grey
Rate of use guide:
3 - 4 Kgs per square metre
|
| FLEXOLASTIC |
2 component cementitious waterproofing and protective
coating system. Flexible and durable WRC approved. Grey or white.
Rate of use guide:
4 Kg per square metre |
| TUFGUARD |
Multipurpose flexible membrane based on high performance
acrylic compounds. Suitable for roofs and other surfaces. White, Green,
Red and Grey
Rate of use guide:
0.75 - 1Kg per square metre depending on porosity. |
| SILICONE WATER REPELLENT |
Clear, liquid coating which penetrates surface
of brick, stone and cement renderings to form durable waterproof barrier.
Avoid contact with glass.
Rate of use guide:
3-6 m² per litre per coat. |
| TUFCOTE AC15 |
Clear acrylic based water resistant and anticarbonation
coating for the external protection of concrete, brickwork and stonework
etc.
Rate of use guide:
7 - 10m² per litre per coat |
| MASONRY SEALER |
Water based sealer for friable stone, brickwork
and render.
Rate of use guide:
7 - 10m² per litre per coat. |
|
|
RELEASE
AGENTS
|
| SURESTRIKE RELEASE AGENT |
A chemical mould release agent applied by brush
or spray to shutter faces before casting concrete. Gives a release
which yields fair faced concrete.
Rate of use guide:
20 - 40 square metres per litre |
| AQUASTRIKE WB |
Water based mould release agent.
Rate of use guide:
30 - 40 square metres per litre |
| SURELEASE MOULD RELEASE
OIL |
A high grade mould oil for use in pre-cast yards
and in general site construction.
Rate of use guide:
20 - 30 square metres per litre |
